22

2020

-

10

Zhejiang Artsen Chemical Co.,LTD. 8500 Tons/Year 1,1, 1-Trichlorotrifluoroethane Technological Transformation and Expansion Project Environmental Impact Assessment Information Publicity


According to the Interim Measures for Public Participation in Environmental Impact Assessment, the Implementation Opinions on Effectively Strengthening Public Participation in Environmental Impact Assessment of Construction Projects and the Notice on Standardizing the Implementation of Public Participation System in Environmental Impact Assessment of Construction Projects, publicity must be carried out before the environmental impact report of this project is carried out, so that a wider range of social organizations and the public can understand and participate in the environmental impact assessment of the project. The relevant contents are hereby announced as follows:
Basic situation of 1. construction project
Project Name:Zhejiang Exon Chemical Co., Ltd. 8500 Tons/Year 1,1, 1-Trichlorotrifluoroethane Technological Transformation and Expansion Project
Nature of Project:Expansion
Project scale:8500 tons/year 1,1, 1-trichlorotrifluoroethane
Distribution of main environmental sensitive targets within the scope of 2. environmental impact assessment
According to the site survey, the distribution of the main environmental sensitive points around the project is shown in the table below.
Table 1 List of Environmental Protection Objectives and Protection Levels of the Project

environmental elements

Name

Coordinates/m

Protection object

Protection of content

Environmental functional area

Relative bearing

Closest distance to the factory boundary

X

Y

Atmosphere

Zhenhai Village

299355

3337275

Crowd

Ambient air

Level II

SE

1400m

Zhendong Village

299908

3336755

Crowd

SE

2300m

Fengmian Village

298737

3336961

Crowd

SE

1100m

Zhuhai Village

298005

3336757

Crowd

S

1000m

Union Village

297107

3336284

Crowd

SW

1600m

Development Zone Living Area

296571

3336705

Crowd

SW

1400m

Grape shed

298382

3337444

Grape

SE

1000m

Water

Center River

Water body

Surface water environment

Class III

S

Next

through a river

Water body

W

Next

Sound

Within 200m of the factory boundary and outside the factory boundary

Factory boundary

Acoustic environment

3 categories

Four sides

Within 200m

Forecast of main environmental impacts in 3.
1. Waste gas: The waste gas produced by the project is mainly hydrogen chloride, chlorine and hydrogen fluoride. The waste gas of the project is discharged through an exhaust cylinder of not less than 15m after being treated by three-stage falling-film alkali spray. After the waste gas pollutants of the project are treated, the emission of waste gas pollutants is less, and the emission standard is achieved. It is predicted that the exhaust gas after the completion of the project has little impact on the surrounding environment.
2. Wastewater: After the wastewater generated by the project is collected, it enters the wastewater treatment station in the plant area for treatment. After reaching the standard, it enters the Shangyu Sewage Treatment Plant, which basically has no impact on the nearby river.
3. Solid waste: the solid waste of the project can be "zero" discharged after being recycled, treated by qualified units and transported to landfill, which basically has no impact on the surrounding environment.
4. Noise: The noise generated by the project can be discharged up to standard after corresponding treatment, and the surrounding sound environment meets the standard requirements.
After the completion of this project, through the adoption of advanced and effective pollution control measures, the discharge of various pollutants can be effectively controlled, and the environmental quality can be maintained at the current level, so it is in line with the principle of maintaining environmental function zoning.
Main environmental protection measures, environmental risk prevention measures and expected effects to be taken by the 4.
Table2  Project mainthree wastesSummary of Pollution Prevention Measures

Kind

Name of measures

Expected effect

Waste water

Strictly implement clean and sewage diversion and rain and sewage diversion; after the project wastewater is collected, it will enter the wastewater treatment station in the plant area for treatment and then enter the Shaoxing sewage treatment plant.

Standard acceptance tube

Exhaust gas

The waste gas of the project is discharged through an exhaust cylinder of not less than 15m after being treated by three-stage falling-film alkali spray.

Standard discharge

solid waste

Hazardous waste shall be sent to qualified units for treatment, and general solid waste shall be entrusted for disposal or recycled by suppliers.

harmless treatment

Noise

Pay attention to equipment selection, try to choose low noise equipment.

Standard

accident prevention

① Further improve the environmental risk emergency plan, and it is recommended to entrust professional units to prepare; ② Improve emergency facilities according to the emergency plan; ③ Carry out emergency drills and strengthen daily management.

Control environmental risks within tolerable limits

Preliminary Conclusions of 5. Environmental Impact Assessment
The 8500-ton/year 1,1, 1-trichlorotrifluoroethane technological transformation and expansion project of Zhejiang Exon Chemical Co., Ltd. is to be built at No. 2, Weisandong Road, Shangyu Economic and Technological Development Zone, Hangzhou Bay. The construction of the project is in line with the planning and the "three lines and one order" ecological environment zoning control plan of Shaoxing City; it is in line with the national industrial policy and the requirements of the planning environmental assessment; the pollutants discharged meet the national and provincial pollutant discharge standards and the requirements of the total emission control index of major pollutants; the pollutants of the project can be discharged up to the standard after treatment, and the impact on the surrounding environment is within the acceptable range.
From the perspective of environmental protection, it is feasible to construct the project in the proposed plot.
Contents of 6. solicitation of opinions
1The object and scope of soliciting opinions
The social groups and masses that may be affected within the scope of assessment are mainly the enterprises near the project site and the surrounding villages.
2Time limit for soliciting opinions
Public comment time: October 22, 2020 to November 4, 2020, a total of 10 working days.
3Public feedback channels
The public can express their opinions on project construction and EIA work by calling, writing or interviewing the contact information left by the construction unit and EIA unit.
7. Environmental Approval/Contact Information of Filing Department, EIA Unit and Project Construction Unit
1Environmental approval/Contact Information of Filing Department
Project approval/filing department: Shangyu Branch of Shaoxing Ecological Environment Bureau Tel: 0575-82721207
2Name and contact information of the environmental impact assessment institution undertaking the assessment work
EIA Unit: Zhejiang Jinhuan Environmental Protection Technology Co., Ltd.
Telephone: 15088762176
3Contact Information of Construction Unit
Construction unit: Zhejiang Exon Chemical Co., Ltd.
Address: No.2, Weisandong Road, Shangyu Economic and Technological Development Zone, Hangzhou Bay
Tel: 13429574853 Contact: Wang Yongchun
Time and place of full-text publicity of 8. project
After the formal approval/filing draft of the project is completed, the EIA text of the project will be publicized on the enterprise website before it is submitted to the ecological environment department for approval/filing.